Pulpit Accessories

Accessories

$30
How do you care for your pulpit? It is important to remember that the pulpit top (acrylic) and pulpit base (stainless steel) need different methods for cleaning. Carrying the pulpit correctly can also help preserve the life of the top. How do you clean your pulpit top? 1. Procson Pulpit top... more
$40
About this pulpit cover - 60cm/24" wide: Most churches order a cover for the lectern to help protect the top when it’s not in use. Made from elastic edged cotton drill, a cover helps to prolong the life of the lectern by helping to keep the top scratch and dust free. Covers are especially... more
$40
About this pulpit cover - 70cm/28" wide: Most damage is caused when the preacher is NOT using the lectern! The cover helps to keep the top free from dust and scratches when it’s not in use. Most churches order these covers as they can prolong the life of your lectern. They are essential if the... more
$40
About this pulpit cover for Arc water table: We have discovered that most damage done to lectern and table tops is caused when the preacher is NOT preaching! A cover will help to keep your table top scratch and dust free in between use. Made from high quality elastic edged cotton drill, a cover... more
$60
Pulpit cover for Arc communion table: The Communion Table has a large top. A cover will help to prolong it’s life when not is use. Helping to keep it scratch and dust free, the elastic edged, cotton drill cover will help to keep the top in good condition. Highly recommended if your communion... more
$450
About this plywood case for the Arc2 and Water Table and Preachers Table This is a versatile and strong plywood box with a lot of design thought and a clever method of making. It fits an Arc2 pulpit (adjustable or fixed height), or an Arc2 pulpit (adjustable or not) and water table together,... more
$450
About this plywood case for the Arc2 with Microphone Mounts This plywood case fits the Arc2 with microphone mounts ONLY. (it does not fit a table too) It has interlocking joints and is glued and screwed for strength. It has no padding or foam. Plywood is naturally slightly softer than the... more
$450
About this plywood case for the Arc3 Pulpit Who knew how challenging it is to make a a versatile and strong plywood box?  We needed a strong case to securely hold the Arc3 pulpit. It has interlocking joints and is glued and screwed for strength. It has no padding or foam. Plywood is... more
$350
About this plywood case for the Arc3 Table In order to make a versatile and strong plywood box, we needed a lot of design thought and a clever method of making. This case fits an Arc3 table. It has intergrated joints and is glued and screwed for strength. It has no padding or foam. Plywood is... more
$200
About this lectern banner signboard: This is a short signboard for your 60cm/24” wide Arc2 pulpit. The first one we made was for Canberra University. Their alumni association needed interchangeable signs for their Arc lecterns.   More about this lectern banner signboard: This... more
$200
About this lectern banner signboard: This is a short signboard for your 70cm/28” wide Arc2 pulpit. irst made by us for Canberra University. Their alumni association needed interchangeable signs for their Arc lecterns.   More about this lectern banner signboard: This signboard is... more
$200
About this lectern banner signboard with microphone inputs: This is a short signboard for your 70cm/28” wide Arc2 pulpit wth microphone inputs. The signboard can be used in two ways; either with a temporary slip in paper sign or with vinyl permanently applied.   More about this lectern... more
$300
Tall Signboard for Arc pulpit: About this lectern banner signboard This is a full height signboard for the Arc2 lectern. You can remove it and take it to a sign shop to add your church logo or other graphics.   More about this lectern banner signboard: This signboard for our Arc2... more
$550
About this lectern microphone- Countryman- noise cancelling: We tested every lectern microphone we could get our hands on and found this to be the best by far. ​Like noise-cancelling headphones, but in a microphone. This means you don’t need a shock mount. You need phantom power on your sound... more
$200
About this lectern microphone – Audio Technica Pro 49QL: This is a great quality lectern microphone at a low price. Made in Japan. 
$100
About this lectern light:  This LED light uses 12v power and plugs into a socket on the lectern top. It comes with a 12v plug pack which plugs into 230-240v mains power at one end and into flying lead (1.75m long). You can use this with either of the following: 1. Arc2 lectern with mic... more
i
n
f
o
@
p
r
o
c
s
o
n
.
c
o
m
tel (02) 9718 0804
tel (int) +61 2 9718 0804
29 Spark St, Earlwood
NSW 2206, Sydney, Australia

Shopping cart

Your shopping cart is empty.